Sharp PC-1403

Sharp PC-1403
Calculator
Sharp PC-1403 handheld BASIC computer
Type	Pocket computer
Introduced	1986
Entry mode	Infix, BASIC,
Display type	LCD dot-matrix
Display size	24 characters
CPU
Processor	CPU: Hitachi SC61860 (8-bit CMOS)
Frequency	768 kHz
Programming
Programming language(s)	Unstructured BASIC
User memory	8 KB
Firmware memory	72 KB
Interfaces
Ports	1x proprietary (11 pins)
Other
Power supply	2x CR2032
Power consumption	0.03 W

The Sharp PC-1403 was a small scientific calculator and pocket computer manufactured by Sharp. It was the successor of the Sharp PC-1401, and had better display, more RAM and better system software.

Technical specifications

CPU: Hitachi SC61860 (8-bit CMOS) 768 kHz
Memory: 8 KB RAM (6863 bytes available), 72 KB ROM; 32 KB RAM in PC-1403H model
Display: Monochrome LCD 1 line with 24 5×7 characters
Power: 6 V DC - 2× CR2032, 0.03 W
Connector (11 pins) for external devices
Integrated speaker (4 kHz beep only)
Contrast adjustment wheel
Software: Simple BASIC interpreter; calculator mode
Matrix calculations

Manufacturing started in 1986.

It is possible to convert the 1403 to a 1403H by removing the 8 K RAM and soldering in a 32 K RAM. An inverter IC is needed for this, too.

Calculator

Calculations could be performed in two modes CAL and RUN.^[1] In the former, the PC-1403 would behave like a normal scientific calculator at the time with formulas entered in algebraic logic. In RUN mode, BASIC statements could be entered for immediate execution and print out. The latter was similar to the Direct algebraic logic employed by modern calculators.

Programming

The programming model employed was unstructured BASIC for which the PC-1403 distinguished between RUN and PRO mode. The later being used to enter and edit program and the former being used to execute them.

Programming example

Here is a sample program that computes the factorial of an integer number from 0 to 69. It can be called by entering a number or an expression followed by pressing DEF F (in run mode).

10 "F" AREAD N                         ''allows to start the program with <expression> DEF F
20 F=1                                 ''Set start value of F to 1
30 FOR I=1 TO N                        ''counts I from 1 to N
40 F=F*I                               ''calculates F=F*I
50 NEXT I                              ''repeats loop from line 40
60 PRINT STR$ N+"!=";F                 ''print result - i.e. 5!=120.
70 END                                 ''end of program

Machine language programming

It is possible to write machine language programs into memory using the POKE command and starting them with the CALL command.

References

^ SHARP Pocket Computer Model PC-1403 - Operation Manuel (PDF). Osaka, Japan: Sharp Electronics / Sharp Corporation. 1986. Archived (PDF) from the original on 10 September 2016.

Sharp Corporation

Divisions
and subsidiaries

Current	Dynabook Inc. Sharp Solar Takaya
Defunct	Optonica¹

Joint ventures
and shareholdings

Calculators

Computers

Laptops and portables	Actius RD3D MM10 Muramasas PC-4500 PC-5000 PC-7000
Pocket computers	PC-1211 PC-1251 PC-1350 PC-1401 PC-1403 PC-1500 PC-1600 PC-3000 PC-E220 PC-E500S Wizard Zaurus
Home computers	MZ X1 X68000 list of games Hotbit